Rear Door Window Motor: Testing and Inspection

POWER WINDOW MOTOR INSPECTION

Rear Power Window Motor

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Sail garnish Sail Garnish Removal/Installation

b. Rear door trim Rear Door Trim Removal/Installation

3. Disconnect the rear power window motor connector.

4. Apply battery positive voltage and connect the ground to rear power window motor terminals E and F, and then inspect the rear power window motor operation.






- If the power window motor does not operate as indicated in the table, replace it.

CAUTION:
- If the power window motor temperature is high, the motor may not rotate due to the motor internal bimetal function. Leave it untouched for about 3 min to cool it down, then reinspect.