P0705

DTC P0705 [GF4A-EL]





TROUBLESHOOTING HINT
TR switch description
- Six position ON/OFF type TR switch is used.
- TR switch is installed in the upper part of the transaxle.
- Detects the selector lever positions in P, R, N, D, 2, or 1 range, each respective range switch is turned ON.
- TR switch signal is used for following controls and monitors:
- Shift control
- Line pressure control
- Timing control
- TCC control
- Engine-transaxle total control (Torque reduction control)
- Engine-transaxle total control (N-D/R select control)
- Slope mode control
- OBD system





TR switch specification

DIAGNOSTIC PROCEDURE





Step 1 - 5





Step 6 - 12