U2064

Detection Condition/Possible Cause:

DTC U2064[INSTRUMENT CLUSTER]

Diagnostic Procedure
1. Verify the freeze frame data.




2. Determine which unit is thought to be malfunctioning based on the freeze frame data.

NOTE:
- If several warning light illumination requests are received, they will be recorded in one freeze frame data.
- Performing the active command mode inspection for ABS/DSC while the engine is running could result in the DTC U2064 being stored in the instrument cluster.

3. Inspect the malfunctioning part.
- Repair or replace if necessary.

4. Clear the DTC from the memory.
5. Turn the ignition switch to the LOCK position.
6. Turn the ignition switch to the ON position.
7. Verify that the DTC U2064 is displayed using the M-MDS.
- If DTC U2064 is displayed, go back to Step 1.