Component Tests and General Diagnostics
SEAT WEIGHT SENSOR INSPECTIONCAUTION:
- If any of the following work is performed, perform the seat weight sensor inspection using the M-MDS.
- Removal of the passenger-side seat
- Loosening and retightening of passenger's seat fixing bolts
- Or, the vehicle is involved in a collision
- If any of the following work is performed, perform the seat weight sensor calibration using the M-MDS. (See SEAT WEIGHT SENSOR CALIBRATION.)
- Replacement with a new seat weight sensor
- Replacement with a new seat weight sensor control module
- Replacement with new passenger-side seat parts
- Disassembly of the passenger-side seat
1. Connect the M-MDS to the DLC-2 (16-pin).
2. Select "Body" from the menu.
3. Select "Restraints".
4. Select "Seat Weight Sensor ReZero Procedure".
5. Perform inspection following the procedures on the M-MDS screen.
CAUTION: Because the seat belt rail is installed to the seat weight sensor bracket, do not apply a load to the seat belt rail during the inspection.