Air Register: Service and Repair
VENTILATOR GRILLE REMOVAL/INSTALLATIONDriver's Side
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. A-pillar trim
2. Front scuff plate
3. Front side trim
4. Hood release lever
5. Lower panel
6. Decoration panel
7. Dashboard center panel
8. Meter hood
9. Instrument cluster
10. Dashboard garnish
3. Pull the driver-side ventilator grille outward and remove it.
4. Remove the screw, then remove the driver-side demister grille.
5. Install in the reverse order of removal.
Passenger's Side
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. A-pillar trim
2. Front scuff plate
3. Front side trim
4. Glove compartment
5. Decoration panel
6. Dashboard center panel
7. Dashboard garnish
3. Pull the passenger-side ventilator grille outward and remove it.
4. Remove the screw, then remove the passenger-side demister grille.
5. Install in the reverse order of removal.
Center
1. Remove the decoration panel.
2. Remove the dashboard center panel.
3. Remove the screws, then remove the center ventilator grilles.
4. Install in the reverse order of removal.