Shock Absorbing Pad Removal/Installation
SHOCK ABSORBING PAD REMOVAL/INSTALLATION1. Remove the following parts:
1. A-pillar trim
2. Front scuff plate inner
3. Rear scuff plate
4. B-pillar lower trim
5. Front seat belt upper anchor installation bolt
6. B-pillar upper trim
7. Rear package tray lid
8. Sub-trunk
9. Third-row seat
10. Rear header trim
11. Trunk end trim
12. Third-row seat belt lower anchor installation bolt (7-passenger model)
13. Cargo compartment light
14. Trunk side trim
15. Second-row seat belt upper anchor installation bolt
16. C-pillar trim
17. Map light
18. Assist handle
19. Sunvisor
20. Headliner
2. Pull the shock-absorbing pad outward and detach pins A and tabs B.
3. Remove the shock-absorbing pad.
4. Install in the reverse order of removal.