Auxiliary Step / Running Board: Service and Repair

SIDE STEP MOLDING REMOVAL






1. Remove the fasteners.
2. Pull the side step molding and remove clips A from the vehicle body.
3. Slide the side step molding to the vehicle rear and remove clips B and C from the side step molding.
4. Remove the side step molding.
5. Remove clips B and C from the body, then install it to the side step molding.

SIDE STEP MOLDING INSTALLATION






1. Install clips A and then C to the vehicle from the rear side.
2. Install the clips B.
3. install the fasteners.