Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Hydraulic Control Assembly - Antilock Brakes >> Testing and Inspection >> Scan Tool Testing and Procedures

Scan Tool Testing and Procedures

DSC HU/CM INSPECTION

1. Disconnect the DSC HU/CM connector.
2. Connect the negative battery cable.
3. Attach the tester lead to the DSC HU/CM harness side connector, then inspect voltage, continuity or resistance according to the standard (reference value) on the table.

Standard (Reference Value)

Standard (Reference Value) (Part 1):




Standard (Reference Value) (Part 2):




Standard (Reference Value) (Part 3):




Standard (Reference Value) (Part 4):




pro multis · About Operation CHARM