Rear Bumper Reinforcement: Service and Repair

REAR BUMPER REINFORCEMENT REMOVAL/INSTALLATION

1. Remove the following parts:
a. Trunk end trim Trunk End Trim Removal/Installation

b. Trunk side trim (4 door)

c. Trunk side trim (RH) (5 door)

d. Service hole cover (LH) (5 door)

e. Rear combination lights Service and Repair

f. Rear bumper Removal and Replacement

2. Remove the fasteners, then remove the energy absorbing foam.






3. Remove the nuts, then remove the rear bumper reinforcement.

4. Install in the reverse order of removal.