Climate Control Unit Installation [Manual Air Conditioner]

CLIMATE CONTROL UNIT INSTALLATION [MANUAL AIR CONDITIONER]

1. Install the wire clamp to the A/C unit.

2. Set the temperature control dial at MAX COLD.

3. Set the airflow mode selector dial at defroster.

4. Install the E-rings to each position on the wires shown in the figure.






5. Pass each wire through the following routes and connect to A/C unit.






6. Connect the climate control unit connectors.

7. Install the climate control unit.

8. Adjust the climate control unit wires. Adjustments

9. Install the center panel module.

10. Attach the PJB wiring harness clamp to dashboard.

11. Install the following parts:
a. Console Removal and Replacement

b. PJB and PJB bracket. Service and Repair

c. Glove compartment Service and Repair

d. Decoration panel Decoration Panel Removal/Installation

e. Lower panel Lower Panel Removal/Installation

f. Front side trim Front Side Trim Removal/Installation

g. Front scuff plate Front Scuff Plate Removal/Installation

h. Detach the hood release lever from the lower panel. Service and Repair

i. Ashtray panel

12. Connect the negative battery cable.