Instrument Cluster Input/Output Check Mode

INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE

NOTE:
- In this mode, it is possible to verify the items in the following chart.

Check Code Table

08-55:

NOTE:
- Check codes which are not listed may be indicated, but they cannot be inspected.

- The check codes are displayed in numerical order. (While performing the inspection, if you want to inspect a check code with a number smaller than the code number you are currently inspecting, terminate the check mode then repeat the inspection from the beginning.)

- If a speed signal is input to the instrument cluster (the wheels are rotated) while a code other than check code 50 or 51 is displayed, the input/output check mode will be cancelled.

- The check codes can be fast-forwarded by pushing and holding the odometer/tripmeter switch for 1 s or more.






Checking Order

NOTE:
- When inspecting more than two check codes, begin with the code with the highest ranking.





Check Code Inspection

Check code 08





Check code 12





Check code 13





Check code 14





Check code 16





Check code 22





Check code 23





Check code 25





Check code 26





Check code 31





Check code 32





Check code 55