Starting Procedure For On-Board Diagnostic Test Mode [Bluetooth System (Hands-Free Telephone (HF/TEL) System)]

STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [Bluetooth SYSTEM (HANDS-FREE TELEPHONE (HF/TEL) SYSTEM)]

NOTE:
- All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form

With Audio Unit

1. Switch the ignition to ACC or ON.

2. Turn the audio unit power to OFF.

3. While pressing the POWER/VOLUME switch, simultaneously press the PRESET switch "1" and the PRESET switch "6" for 2 s or more.






NOTE:
- If several DTCs are in the memory, they can be displayed using the SEEK switch (up or down).
Current malfunction





Past malfunction






4. To stop the on-board diagnostic test mode, ignition is switched to off.

With Car-navigation Unit

1. Switch the ignition to ACC or ON.

2. Turn the audio power to OFF.

3. While pressing the POWER/VOLUME switch, simultaneously press the DISPLAY switch for 0.2 s or more.






4. While pressing the Detail switch.






5. To stop the on-board diagnostic test mode, ignition is switched to off.