Starting Procedure For On-Board Diagnostic Test Mode [Audio]

STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [AUDIO]

NOTE:
- All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

1. Switch the ignition to ACC or ON.

2. Turn the audio unit power to OFF.

3. While pressing the POWER/VOLUME switch, simultaneously press the AUX switch and the REPEAT switch for 2 s or more.






NOTE:
- If several DTCs are in the memory, they can be displayed using the SEEK switch (up or down).

4. To stop the on-board diagnostic test mode, ignition is switched to off.