No.3 ABS Warning Light Does Not Illuminate With Switch The Ignition To On

NO.3 ABS WARNING LIGHT DOES NOT ILLUMINATE WITH SWITCH THE IGNITION TO ON [ABS/TCS]

Troubleshooting Hints:

*1
Without advanced keyless entry and push button start system
*2
With advanced keyless entry and push button start system
Diagnostic procedure

Step 1-Step 5:

Step 6:

- When performing an asterisked (*) troubleshooting inspection, shake the wiring harness and connectors while doing the inspection to discover whether poor contact points are the cause of any intermittent malfunctions. If there is a problem, check to make sure connectors, terminals and wiring harness are connected correctly and undamaged.