Leak Detection Pump: Service and Repair

EVAPORATIVE EMISSION (EVAP) SYSTEM LEAK DETECTION PUMP REMOVAL/INSTALLATION [LF]

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable. Removal and Replacement

3. Disconnect the EVAP system leak detection pump connector.

4. Disconnect the evaporative hose from the EVAP system leak detection pump.






5. Cover the evaporative hose with vinyl sheets or the like to prevent them from being scratched or contaminated with foreign material.

6. Remove the EVAP system leak detection pump with the bracket.

7. Remove the bracket from the EVAP system leak detection pump.






8. Install in the reverse order of removal.

Evaporative Hose Installation Note

1. Fit the evaporative hose onto the respective fittings, and install clamps as shown.






a. Insert the evaporative hose securely to the nipple.

b. Inspect the evaporative hose for damage and deformation.