Navigation Display: Service and Repair
CAR-NAVIGATION UNIT REMOVAL/INSTALLATION
1. Remove the battery cover. Removal and Replacement
2. Disconnect the negative battery cable.
3. Remove the following parts:
a. Side wall Side Wall Removal/Installation
b. Selector lever knob (ATX) Front Console Removal/Installation
c. Shift lever knob (MTX) Front Console Removal/Installation
d. Center console (Vehicles with rear vent) Center Console Removal/Installation
e. Front console Front Console Removal/Installation
f. Climate control unit Climate Control Unit Removal/Installation - Full-Auto Air Conditioner Climate Control Unit Removal - Manual Air Conditioner Climate Control Unit Inspection - Manual Air Conditioner
4. Remove the car-navigation unit installation bolt.
Tightening torque
- 8-10 Nm {80-110 kgf-cm, 70-95 in-lbf}
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.