Side Panel Removal/Installation

SIDE PANEL REMOVAL/INSTALLATION

Driver's Side

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Front scuff plate inner (driver's side) Front Scuff Plate Removal/Installation

b. Front side trim (driver's side) Front Side Trim Removal/Installation

c. Side wall Side Wall Removal/Installation

d. Center console (Vehicles with rear vent) Center Console Removal/Installation

e. Selector lever knob (ATX) Front Console Removal/Installation

f. Shift lever knob (MTX) Front Console Removal/Installation

g. Front console Front Console Removal/Installation

h. Hood release lever Service and Repair

i. Lower panel Lower Panel Removal/Installation

4. Remove the screws.






5. Remove the side panel from the lower panel.

6. Install in the reverse order of removal.

Passenger's Side

1. Pull the side panel outward and detach clips A.






2. Pull the side panel outward and detach tabs B from the dashboard.

3. Remove the side panel.

4. Install in the reverse order of removal.