Second-Row Seat Belt Removal/Installation

SECOND-ROW SEAT BELT REMOVAL/INSTALLATION

CAUTION:
- The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.

1. Remove the following parts:
a. Rear package tray lid Service and Repair

b. Third-row seat Third-Row Seat Removal/Installation

c. Rear scuff plate Rear Scuff Plate Removal/Installation

d. Trunk end trim Trunk End Trim Removal/Installation

e. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

f. Trunk side trim

2. Remove in the order indicated in the table.










3. Install in the reverse order of removal.