Shift-Lock Solenoid Inspection

SHIFT-LOCK SOLENOID INSPECTION

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the battery duct. Removal and Replacement

4. Remove the following parts:
a. Side wall.

b. Heat insulator (front and center).

c. Selector lever knob and indicator component.

d. Center console. Center Console Removal/Installation

5. Disconnect the selector lever component connector.

6. Verify the continuity between terminals I and K.






- If there is any malfunction, replace the selector lever component. Service and Repair