Power Outer Mirror Inspection

POWER OUTER MIRROR INSPECTION

1. Disconnect the negative battery cable.

2. Remove the inner garnish. Inner Garnish Removal/Installation

3. Disconnect the power outer mirror connector.

4. Remove the front door trim. Front Door Trim Removal/Installation

5. Apply battery positive voltage and connect the ground to the power outer mirror terminals and inspect the power outer mirror operation.






- If the power outer mirror does not operate as indicated in the table, replace it.





6. Apply battery voltage to power outer mirror connector terminal A, and connect terminal C to ground.






- If not as indicated in the table, or if the resistance is not within the specification, replace the power outer mirror.