Fuel Pump Unit Removal/Installation

FUEL PUMP UNIT REMOVAL/INSTALLATION [L3 WITH TC]

WARNING:
- Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedure", while referring to "BEFORE SERVICE PRECAUTION".
- Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, before performing the fuel pump unit removal/installation, always complete the "Fuel Leak Inspection After Fuel Pump Unit Installation".

1. Complete the "BEFORE SERVICE PRECAUTION". (See Before Service Precaution)

2. Remove the battery cover. Removal and Replacement

3. Disconnect the negative battery cable. Removal and Replacement

4. Remove the rear seat cushion. Rear Seat Cushion Removal/Installation

5. Remove the service hole cover.






6. Disconnect the fuel pump unit connector.

7. Disconnect the joint hose of fuel tank side.

8. Disconnect the breather hose of fuel-filler pipe side.

9. Remove the following parts as a single unit.

- Fuel tank
- Breather hose
- Fuel pump unit
- Fuel hose

10. Remove the order indicated in the table.










11. Install in the reverse order of removal.

12. Complete the "AFTER SERVICE PRECAUTION". After Service Precaution