C1306
DTC C1306 [DYNAMIC STABILITY CONTROL (DSC)]
NOTE:
- The initialization value of the steering angle sensor is stored using the battery power supply. Therefore, the battery power supply of the steering angle sensor is cut and the stored initialization value is cleared when any of the following items are performed. DTC C1306 is stored in the memory.
- Negative battery cable disconnection
- Steering angle sensor connector disconnection
- Fuse (BTN 30A, DSC 7.5A) removal
- Wiring harness disconnection between battery and steering angle sensor connector
Detection Condition/Fail-Safe/Possible Cause:
Diagnostic procedure
