Back Trim Removal/Installation
BACK TRIM REMOVAL/INSTALLATION
1. Remove the following parts:
a. Console Console Removal/Installation
b. Quarter trim Quarter Trim Removal/Installation
c. Scuff plate Scuff Plate Removal/Installation
d. Tire house trim Tire House Trim Removal/Installation
e. Aeroboard Service and Repair
f. Front seat back bar garnish Seat Back Bar Garnish Removal/Installation
2. Pull the open hook lever outward and remove it while pinching the tabs as shown in the figure.(except the power retractable hardtop)
3. Remove the fasteners.
4. Pull the back trim outward and detach clips A and B.
5. Remove the back trim.
6. Install in the reverse order of removal.