Convertible Top Deck Lid Position Switch / Sensor: Service and Repair

DECK PANEL LIMIT SWITCH REMOVAL/INSTALLATION

CAUTION:
- If the deck panel does not operate electrically, see "DECK PANEL MANUAL OPEN/CLOSE PROCEDURE" to open/close the deck panel. Procedures

1. Fully open the deck panel.

2. Remove the battery cover.

3. Disconnect the negative battery cable. Removal and Replacement

4. Set the side shelf out of the way. Side Shelf Removal/Installation

5. Remove the deck panel. Removal and Replacement

6. Remove the deck panel motor. (RH) Service and Repair

7. Remove the screws A and B.






8. Remove the deck panel limit switch prate.

9. Remove the screws C.

10. Remove the deck panel limit switch.

11. Install in the reverse order of removal.