Remote Switch: Service and Repair

STEERING SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable and wait for 1 min or more.

2. Remove the driver-side air bag module. Standard Deployment Control System Two-Step Deployment Control System

3. Remove the steering wheel. Steering Wheel And Column Removal/Installation - Without Advanced Keyless Entry And Push Button Start System Steering Wheel And Column Removal/Installation - With Advanced Keyless Entry And Push Button Start System

4. Remove the screw.






5. Remove the wiring harness from the cover hook.






6. Remove the cover tabs and pins from the steering wheel.











7. Remove the cover.

8. Disconnect the connector.






9. Remove the screw.

10. Remove the steering switch pins from the steering wheel.






11. Remove the steering switch.

12. Install in the reverse order of removal.