Front Door Window Motor: Service and Repair

POWER WINDOW MOTOR REMOVAL/INSTALLATION

Front Power Window Motor

1. Fully lower the front door glass.

2. Disconnect the negative battery cable.

3. Remove the inner garnish. Inner Garnish Removal/Installation

4. Remove the front door trim. Front Door Trim Removal/Installation

5. Remove the front door speaker. Front Door Speaker Removal/Installation

6. Remove the bolts.






7. Disconnect the front power window motor connector.






8. Install in the reverse order of removal.
NOTE:
- When installing the front power window motor to the front power window regulator drum, the drum housing hooks may detach from the door module. If this happens, remove the front door speaker, insert your hand in the speaker installation hole, connect the drum housing hooks, and while supporting the drum housing, install the front power window motor to the drum.