Center Panel Unit Removal/Installation

CENTER PANEL UNIT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Shift lever knob (MT) Transmission Removal/Installation

b. Shift knob (AT) Selector Lever Removal/Installation

c. Upper panel Removal and Replacement

d. Ashtray panel Removal and Replacement

e. Lower panel Lower Panel Removal/Installation

f. Knee bolster Knee Bolster Removal/Installation

3. Remove in the order indicated in the table.

4. Install in the reverse order of removal.

CAUTION:
- When installing the center panel unit, make sure that the wiring harness and antenna feeder are not caught between the unit and dashboard. If the wiring harness or the antenna feeder is caught between the unit and dashboard, it may cause malfunctions.

With audio unit





With car-navigation unit










Center Panel Unit Removal Note

1. Detach the clips from the dashboard while pulling the center panel unit outward, and then remove the center panel unit.

With audio unit





With car-navigation unit