Seat Latch: Service and Repair

REAR SEAT BACK STRIKER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Rear scuff plate Rear Scuff Plate Removal/Installation

b. Rear seat back Rear Seat Back Removal/Installation

c. Rear seat cushion Rear Seat Cushion Removal/Installation

d. Trunk end trim. Service and Repair

e. Trunk side trim.

f. C-pillar trim (See C-Pillar Trim Removal/Installation)

3. Remove the bolts, then remove the rear seat back striker in the direction of the arrow shown in the figure.






4. Install in the reverse order of removal.