Rear Seat Back Frame Removal/Installation

REAR SEAT BACK FRAME REMOVAL/INSTALLATION

1. Remove the rear seat cushion. Rear Seat Cushion Removal/Installation

2. Remove the rear buckle installation bolt. Rear Buckle Removal/Installation

3. Remove the rear seat back. Rear Seat Back Removal/Installation

4. Remove the bolt, then remove the washer, bushing, hinge, and the cover.






5. Remove the child-restraint seat anchor covers.






6. Slide hooks A in the order of (1), (2), (3) shown in the figure to detach them from hooks B.

7. Move the hooks in the direction of the arrow shown in the figure to remove them from the frame.






8. Peal back the rear seat trim, release the pole guide tabs in the direction of arrow (4) shown in the figure, then pull out the pole guides in the direction of arrow (5).






9. Release the tab of the rod by pulling it in the direction of arrow (6) shown in the figure.






10. Release the rod from the frame by pulling it in the direction of arrow (7) shown in the figure.

11. While releasing the tabs of the bezel in the direction of arrow (8) shown in the figure, remove the bezel, recliner knob, and rod as a single unit by pulling them in the direction of arrow (9).






12. While releasing the tabs of the recliner knob in the direction of arrow (10) shown in the figure, pull the recliner knob in the direction of arrow (11) to disassemble the recliner knob, bezel, and the rod.






13. Remove the screws, then remove the belt cover.






14. Remove the seat back frame from the seat back pad by pulling it in the direction of the arrow.






15. Remove the bolt, then remove the rear center seat belt.






16. Remove the seat back trim from the seat back pad by peeling off the surface fastener while opening the seat back trim.






17. Install in the reverse order of removal.