Fog/Driving Lamp: Service and Repair

FRONT FOG LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Lift up the vehicle.

3. Remove the screw A shown in the figure and bend back the mudguard in the direction of the arrow.






4. Disconnect the connector.






5. Remove the screw B.

6. Remove the front fog light component.

7. Remove the screw C.






8. Remove the adjustment bolt.

9. Pull the front fog light in the direction of the arrow shown in the figure and remove it from the front fog light cover.

10. Install in the reverse order of removal.

11. Adjust the front fog light aiming. Adjustments