Oil Control Valve (OCV) Removal/Installation
OIL CONTROL VALVE (OCV) REMOVAL/INSTALLATION [MZR 1.5]
1. Disconnect the negative battery cable.
2. Disconnect the OCV connector.
3. Remove the OCV.
4. Install the new O-ring.
5. Install the OCV.
6. Tighten the OCV installation bolt.
Tightening torque
- 8-10 Nm {80-110 kgf-cm, 70-95 in-lbf}
7. Connect the OCV connector.
8. Connect the negative battery cable.