Body Control Module (BCM) Removal/Installation

BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION

CAUTION:
- When replacing the BCM, the configuration procedure must be performed before removing the BCM. Replacing the BCM without performing the configuration procedure will result in system malfunction.

1. Perform the BCM configuration when replacing it. Programming and Relearning

2. Disconnect the negative battery cable.

3. Remove the dashboard under cover. Dashboard Under Cover Removal/Installation

4. Remove the glove compartment. Service and Repair

5. Disconnect the connectors at the position shown in the figure.






6. Remove the nuts.






7. Remove the BCM.

8. Install in the reverse order of removal.