Front Door Window Regulator: Service and Repair

FRONT POWER WINDOW REGULATOR REMOVAL/INSTALLATION

1. To access the glass installation bolt, position the front door glass so that the distance from the top of the front door glass to the upper part of the front beltline molding is approx. 80 mm {3.1 in}.






2. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

3. Remove the following parts:
a. Inner garnish Inner Garnish Removal/Installation

b. Front door trim Front Door Trim Removal/Installation

c. Front door speaker Front Door Speaker Removal/Installation

d. Front door glass Service and Repair

e. Front power window motor Service and Repair

4. Remove the nuts.






5. Install in the reverse order of removal.

CAUTION:
- When installing, do not allow the cable to come out from the drum housing.