Rear Door Window Regulator: Service and Repair

REAR POWER WINDOW REGULATOR REMOVAL/INSTALLATION

1. Fully lower the rear door glass.

2. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

3. Remove the rear door trim. Rear Door Trim Removal/Installation

4. Remove the service hole cover.






5. Remove the rear door speaker. Rear Door Speaker Removal/Installation

6. Remove the glass guide. Rear Door Quarter Glass Removal/Installation

7. Remove the rear power window motor. Service and Repair

8. Remove the rear door glass. Rear Door Glass Removal/Installation

9. Remove the nuts.






10. Insert a hand through the speaker installation hole, rotate the drum housing in the direction shown in the figure to detach the tabs from the rear door module.






11. Remove the rear power window regulator through the speaker installation hole.






12. Install in the reverse order of removal.

CAUTION:
- Make sure the cable does not unspool from the drum housing when installing.