Headliner: Service and Repair

HEADLINER REMOVAL/INSTALLATION

1. Shift to the D (ATX) or 4th gear (MTX) position. (4SD)

2. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

3. Remove the rain sensor cover. (Vehicles with auto light/wiper system) (See Service and Repair)

4. Disconnect the rain sensor connector. (Vehicles with auto light/wiper system)

5. Partially peel back the seaming welts.

6. Remove the following parts:
a. Sunroof seaming welt (vehicles with sunroof)

b. A-pillar trim A-Pillar Trim Removal/Installation

c. Front scuff plate Front Scuff Plate Removal/Installation

d. Rear scuff plate Rear Scuff Plate Removal/Installation

e. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

f. Upper anchor of the front seat belt Front Seat Belt Removal/Installation [Standard Deployment Control System] Front Seat Belt Removal/Installation [Two-Step Deployment Control System]

g. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

h. Rear seat cushion Rear Seat Cushion Removal/Installation

i. Tire house trim Tire House Trim Removal/Installation

j. Trunk side upper trim (5HB)

k. C-pillar trim C-Pillar Trim Removal/Installation

l. Map light Map Light Removal/Installation

m. Sunvisor Service and Repair

n. Assist handle Service and Repair

7. Disconnect the microphone connector. (Vehicles with headliner installation type)

8. Disconnect the roof wiring harness connector and remove the roof wiring harness connector clip from the body.

9. Disconnect the rear washer hose. (5HB)

10. Remove the fasteners.
4SD





5HB






11. Take the headliner out from the opened front passenger-side door. (4SD)






12. Take the headliner out from the opened liftgate. (5HB)






13. Install in the reverse order of removal.