Programming and Relearning

INSTRUMENT CLUSTER CONFIGURATION

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

- Select "Module Programming".

- When using the PDS (Pocket PC)

- Select "Programming".
- Select "Module Programming".

3. Select "Programmable Module Installation".

4. Select "IC" and perform procedures according to directions on the M-MDS screen.

5. Retrieve DTCs using the M-MDS and verify that there is no DTC present.

- If any DTC is present, perform applicable DTC inspection. DTC Inspection - Instrument Cluster