P1584

S9/1 (Stop Lamp Switch)

Check component S9/1 (Stop Lamp Switch)

Test sequence
- Switch on ignition.

Status of relevant actual value:
- 'Close' function of component S9/1 (Stop lamp switch):

Specified value
- Switch S9/1 (Stop lamp switch) operated: ON
- Switch S9/1 (Stop lamp switch) not operated: OFF

Note: If fault code P1584 is present:The fault is detected by component N47-5 (ESP, SPS and BAS control module) and an appropriate message is transmitted through the engine CAN to component N3/10 (ME-SFI control module).

Question
- Is the actual value o.k.?
Yes
The actual value is okay. ** End of Test **
No
The actual value is not o.k.
Possible cause and remedy
- Read fault memory from control unit ESP and rectify faults.

** End of Test **