Test M: DTC B2294 - Restraint System - Safety Canopy Module Fault
PINPOINT TEST M: DTC B2294 - RESTRAINT SYSTEM - SAFETY CANOPY MODULE FAULTM1:
M2-M3:
M3-M5:
M5-M7:
M7-M9:
M9-M11:
M11-M13:
M13-M15:
M16:
M17:
Lamp Fault Codes (LFCs)
The lamp fault codes (LFCs) indicate the specific flagged faults associated with diagnostic trouble code (DTC) B2294.
Normal Operation
Safety canopies are designed to provide occupant protection during a side impact or in the event the vehicle rolls over.
The restraints control module (RCM) checks all safety canopy module circuits for faults. If the RCM detects 1 of the following faults on any module circuit, it will store diagnostic trouble code (DTC) B2294 in memory and, depending on the fault, flash a lamp fault code (LFC) on the air bag indicator.
Fault Conditions
The RCM monitors for the following fault conditions:
- Low resistance
- High resistance or circuit open
- Circuit short to voltage
- Circuit short to ground
Possible Causes
A module fault can be caused by:
- faulted wiring, terminals or connectors.
- a faulty safety canopy module (if equipped).
- a faulted RCM.