Alarm System Transmitter: Service and Repair

PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER







Removal and Installation
1. Remove the ignition lock cylinder.
1 Insert the ignition key into the ignition lock cylinder and turn to the ON position.
2 Push the ignition lock cylinder release button with a suitable tool while pulling out the ignition lock cylinder.

2. Remove the steering column cover and reinforcement.
3. Remove the tilt column handle.
4. Remove the 3 screws and the upper and lower steering column shrouds.
5. Disconnect the PATS transceiver electrical connector.
6. Open the 2 clockspring wiring harness guides.
7. Remove the screws and the PATS transceiver.

8. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the instrument cluster again.

To install, reverse the removal procedure.