Test F: The Roof Opening Panel Does Not Have Soft Stop

PINPOINT TEST F: THE ROOF OPENING PANEL DOES NOT HAVE SOFT STOP

Normal Operation
The roof opening panel position switch removes ground from circuit (OG/WH) when the roof opening panel reaches the CLOSED position and when the roof opening panel reaches the comfort position. In these positions the roof opening panel module will remove power from the roof opening panel motor.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Roof opening panel motor
- Roof opening panel module

F1-F3:

F3-F4:

F5-F6: