Test K: Easy Exit/Easy Entry Is Inoperative/Does Not Operate Correctly

PINPOINT TEST K: EASY EXIT/EASY ENTRY IS INOPERATIVE/DOES NOT OPERATE CORRECTLY

Normal Operation
The driver seat module (DSM) receives a transmission park and key in/out command over the medium-speed controller area network (MS-CAN) communication network and powers the driver seat rearward about 51 mm (2.007 in).

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Easy exit/easy entry not enabled
- Missing status information (CAN communication bus message):
- ignition switch status
- gear selector position

- Key-in-ignition warning switch
- Instrument cluster (IC) module
- DSM

K1-K3: