Alarm System Transmitter: Service and Repair

Passive Anti-Theft System (PATS) Transceiver









Removal and Installation

1. Remove the steering column opening cover.

2. Remove the 3 screws and the lower steering column shroud.

3. Using a suitable tool such as a dentist pick, release the 2 tabs and remove the Passive Anti-Theft System (PATS) transceiver.
- Disconnect the electrical connector.

4. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Cluster (IC) again.

To install, reverse the removal procedure.