Front Door Window Regulator: Service and Repair

REMOVAL AND INSTALLATION

Required Special Tool:

- MB990480: Window Glass Holder

REMOVAL SERVICE POINT

[[A]] POWER WINDOW REGULATOR REMOVAL

1. Remove the door window glass installation bolts.

2.
CAUTION:
If tinting film is adhered to the door window glass, attach special tool MB990480 to the outside of the glass to prevent the film from peeling off.

Lift the door window glass, and attach special tool MB990480 to the glass as shown to prevent the glass from falling.
3. Remove the power window regulator.

INSTALLATION SERVICE POINT

]]A[[ POST-INSTALLATION OPERATION CHECK [DRIVER'S SIDE ONLY]

When the following procedures are carried out, carry out the learning procedures of the power window fully closed position (Refer to Programming and Relearning).

- Power window regulator removal or replacement

- Power window switch removal or replacement