P0299

DTC P0299 SUPERCHARGER FUNCTION

On Board Diagnosis Logic:

DTC Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 5 seconds before conducting the next test.

WITH CONSULT-II




1. Turn ignition switch ON and select DATA MONITOR mode with CONSULT-II.
2. Start engine.




3. Maintain the following conditions for at least 5 seconds.
4. If 1st trip DTC is detected, go to "Diagnostic Procedure" below.

WITH GST
Follow the procedure WITH CONSULT-II.

Diagnostic Procedure

Diagnostic Procedure Step 1 - 2:

Diagnostic Procedure Step 3 - 4: