Magnet Clutch Circuit
Magnet Clutch CircuitSYMPTOM: Magnet clutch does not engage.
Inspection Flow:
INSPECTION FLOW
SYSTEM DESCRIPTION
The front air control controls A/C compressor operation based on intake temperature and a signal from ECM. The ECM may not allow A/C compressor operation if refrigerant pressure sensor value is too high.
Low Temperature Protection Control
The front air control will turn the A/C compressor ON or OFF as determined by a signal detected by the intake sensor.
When intake air temperature is higher than 3.0 °C (37.4 °F), the A/C compressor turns ON. The A/C compressor turns OFF when intake air temperature is lower than 2.5 °C (36.5 °F).
Diagnostic Procedure For Magnet Clutch (Steps 1 - 2):
Diagnostic Procedure For Magnet Clutch (Steps 3 - 5):
Diagnostic Procedure For Magnet Clutch (Steps 6 - 8):
Diagnostic Procedure For Magnet Clutch (Steps 9 - 13):
DIAGNOSTIC PROCEDURE FOR MAGNET CLUTCH
SYMPTOM: Magnet clutch does not engage when A/C switch is ON.