Displaying & Reading Trouble Codes

SELF-DIAG RESULTS MODE
Operation Procedure





1. Perform "CONSULT-II SETTING PROCEDURE". Refer to "CONSULT-II SETTING PROCEDURE".
2. With engine at idle, touch "SELF-DIAG RESULTS". Display shows malfunction experienced since the last erasing operation.

NOTE:
^ The details for "TIME" are as follow:
^ "0": Error currently detected with differential lock control unit.
^ Except for "0": Error detected in the past and memorized with differential lock control unit. Detects frequency of driving after DTC occurs (frequency of turning ignition switch "ON/OFF").