Scan Tool Connecting

CONSULT-II Function (DIFF LOCK)





CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.

CONSULT-II SETTING PROCEDURE

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

^ For details, refer to the separate CONSULT-II Operations Manual.





1. Turn ignition switch OFF.
2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector on vehicle.
3. Turn ignition switch ON.





4. Touch START (NISSAN BASED VHCL).





5. Touch DIFF LOCK.
If DIFF LOCK is not indicated, go to GI-38, CONSULT-II Data Link Connector (DLC) Circuit. How to Perform Efficient Diagnosis For an Electrical Incident
6. Perform each diagnostic test mode according to each service procedure.