Height Sensor

POWER SUPPLY AND GROUND CIRCUIT


HEIGHT SENSOR : Diagnosis Procedure

1.POWER SUPPLY CIRCUIT CHECK





1. Disconnect height sensor connector C8.
2. Turn the ignition switch ON.
3. Check voltage between the height sensor connector C8 terminal 1 and ground.





Is 5V present?
YES - GO TO 2.
NO - Check harness or connector for open or short. If OK, replace the suspension control unit. Refer to Removal and Replacement
2.GROUND CIRCUIT CHECK





1. Turn ignition switch OFF.
2. Check continuity between height sensor connector C8 terminal 3 and ground.





Is continuity present?
YES - Ground circuit is OK.
NO - Repair harness or connector.