Removal And Installation

IGNITION COIL


Removal and Installation


REMOVAL (LH)
1. Remove engine room cover using power tool. Refer to Service and Repair.
2. Remove air cleaner case and air duct and resonator assembly. Refer to Removal And Installation.
3. Move aside harness, harness bracket, and hoses located above ignition coil.
4. Disconnect harness connector from ignition coil.
5. Remove ignition coil.

CAUTION:
Do not shock ignition coil.

INSTALLATION (LH)
Installation is in the reverse order of removal.

REMOVAL (RH)
1. Remove intake manifold collector. Refer to Removal and Installation.
2. Move aside harness, harness bracket, and hoses located above ignition coil.
3. Disconnect harness connector from ignition coil.
4. Remove ignition coil.

CAUTION:
Do not shock ignition coil.

INSTALLATION (RH)
Installation is in the reverse order of removal.