Removal and Replacement

STARTER MOTOR


Removal and Installation


REMOVAL
1. Disconnect the negative battery terminal.
2. Remove engine undercover, using power tools.
3. Remove exhaust manifold cover from exhaust manifold (RH) to gain access to starter cover bolts. Refer to Removal and Installation.
4. Remove starter cover bolts and starter cover.





5. Disconnect terminal "1" connector and terminal "2" nut.
6. Remove the two starter bolts, using power tools.
7. Remove the starter.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Tighten terminal "2" nut carefully.